- #TRAXXAS RUSTLER MOTOR UPGRADE HOW TO#
- #TRAXXAS RUSTLER MOTOR UPGRADE DRIVER#
- #TRAXXAS RUSTLER MOTOR UPGRADE UPGRADE#
- #TRAXXAS RUSTLER MOTOR UPGRADE FULL#
#TRAXXAS RUSTLER MOTOR UPGRADE FULL#
In order to beef up the corners of the truck and reduce friction from the axles, I replaced the stock rear hub carriers, caster blocks, and steering knuckles with a full set of machined aluminum units. A good starting point is to set the front and rear suspension arms so that they are level with the ground. The plastic pre-load clips are used to adjust ride height and should only be adjusted with a battery pack installed. I filled the Big Bore shocks with 40wt shock fluid for good all-around performance on the track and general bashing duties. These units are PTFE-coated and hard-anodized for smooth and consistent performance. The pins are machined for smooth operation and allow the suspension arms to pivot more freely for consistent performance.įor better bump handling and jump absorption, I recommend replacing the stock composite Ultra Shocks with a set of Traxxas aluminum Big Bore™ shocks, (#2660-Long up front and #2662-XXL out back). These heavy-duty pins are longer than the stock screw pins to accept the tie bar and are held in place with E-clips. The tie bar requires the extended suspension pin set (#2640) for installation. This inexpensive piece joins the two front suspension pins together to increase the strength and reliability of the front bulkhead. One of the most effective ways to beef up the Rustler's front end is to add the fiberglass front suspension tie bar (#2532).
Whether you're at the track or your favorite bashing spot, these tips are sure to help you get the most out of your Rustler.
#TRAXXAS RUSTLER MOTOR UPGRADE HOW TO#
In this article I will highlight each accessory and show you how to take the Rustler to the next level for improved performance and a custom look. Traxxas also offers a full line of great looking hop up accessories to improve the appearance, handling, and durability of the Rustler. It's an excellent choice for anyone getting into R/C for the first time, or for the enthusiast looking for a fun little 'charge-and-go' off-road machine that will take their mind off of everyday worries. Not to mention, it's backed by the industry leader in customer support. The Rustler is very easy to use and is incredibly durable. Magnet type: Ultra High-Temperature, sintered neodymiumĬonnection type: TRX 3.The Traxxas Rustler has been a 1/10-scale favorite among electric R/C newcomers for many years. Velineon 3500 Brushless Motor Specifications Thermal protection: 2-stage thermal shutdownĬase size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Low voltage detection: 2-Stage indicators, switchable (on or off) Input Harness Wire: 26 gauge, 3.9" (100mm)in length Motor/battery wiring: 12-gauge Maxx Cable Motor connectors: TRX 3.5mm bullet connectors On-resistance: 0.00075 ohms Max (0.006/8 FETs)īattery connectors: Traxxas High-Current Connector Supported motors: Brushed/Brushless/Sensorless brushless NiCd, NiMH (4-8 cells) or 2-3 cell LiPo battery with Traxxas connector
Velineon VXL-3s ESC, Velineon 3500 Brushless Motor and high-current connector Compatible with high-current 12-gauge wire.Reverse polarity protection makes backward connections impossible.Ultra high temp neodymium magnets, high-speed ball bearings.Optimized for extreme power and efficiency in 1/10 scale vehicles.Built-in output for optional auxiliary cooling fan (TRA3340).
#TRAXXAS RUSTLER MOTOR UPGRADE DRIVER#
Three driver profiles-Sport, Race and Training Modes.Compatible with NiCd, NiMH (4-10 cells) and 2-3 cell LiPo battery packs - two stage low voltage detection for LiPos.Auto-detects and compatible with brushed, brushless and sensored brushless motors.High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control.ĭirect fit in the following 1/10 scale vehicles:Įach component engineered to work with each other to eliminate restrictions and allow maximum power flow From the Traxxas High Current battery connector, to the powerful Velineon 3500 brushless motor, all parts of the system are optimized to eliminate restriction and allow maximum power flow.
All of the components are carefully engineered to work seamlessly together. The key to the Velineon's extreme power output is total system optimization. The Velineon power system is a direct fit for 1/10 scale Traxxas Bandit, Rustler, Stampede 2WD, Stampede 4x4, Slash 2WD, Slash 4x4, and 1/10 Rally vehicles.
#TRAXXAS RUSTLER MOTOR UPGRADE UPGRADE#
The Velineon Brushless System is the ultimate upgrade to any 1/10 Traxxas vehicle currently powered by the Titan 12T or Stinger 20T motor. This is the Traxxas Velineon VXL-3s Brushless Waterproof Motor and ESC Complete Power System for electric powered R/C vehicles.
0 kommentar(er)
